1. 28362036 Fuel Pump IMV Valve Spare Parts&Packaging List
|
NO.
|
1 |
2 |
|
Picture
|
 |
 |
| Name |
Fuel Pump IMV Valve |
Anti-Rust Bag
|
|
Description
|
IMV valve model 28362036 |
Protect the IMV valve from rusting
|
|
NO.
|
3 |
4 |
|
Picture
|
 |
/
|
| Name |
IMV Valve Packing Box |
/
|
| Description |
Protect the IMV valve from damage |
/
|
- Minors are prohibited from using the fuel pump IMV valve assembly, IMV valve accessories, IMV valve packing box, and VCI anti-rust bag to avoid personal injury.
- The IMV valve packaging boxes are recyclable accessories and can be reused.
- VCI anti-rust bags are non-degradable materials, please dispose of them properly after using.
2. 28362036 Fuel Pump IMV Valve Warranty Instructions
(1) Fuel Pump IMV Valve Warranty Conditions And Instructions
It is necessary to provide pictures, videos, or test reports tested by the fuel pump IMV valve inspection equipment as evidence to feed back to the salesman when the fuel pump IMV valve is abnormal during use. Abnormal conditions are properly explained such as: 1.Smoke, 2. Engine shake, 3. Difficulty starting the engine, 4. Engine noise, 5. Oil leakage etc.
The above conditions may also be affected by other parts of the fuel pump. If it is confirmed to be a product problem after testing by our company, it is within the warranty scope.
(2) Fuel Pump IMV Valve Warranty Coverage
- After customer receives the 28362036fuel pump IMV valve within 15 days , if there is a performance failure and the product has no damage on surface, customer can choose to replace it or repair it;
- If the 28362036fuel pump IMV valve has performance problems during the warranty period (6-12 months), and it is confirmed to be product’s problems after being tested, you can contact our salesmen to replace the same model.
- If the product is confirmed to be non-defective, it will be returned in its original condition.
3. 28362036 Fuel Pump IMV Valve Storage Standards
(1) Choose a Suitable Storage Place
The warehouse and cargo yard where the fuel pump IMV valves are stored should be kept clean and dry, and away from the factory buildings that generate harmful gases and dust; do not mix with acid, alkali, salt and other substances; the storage place should have a good drainage system; the cargo yard should be flattened with gravel or furnace ash etc. to enhance the water permeability of the surface layer to keep the reservoir area dry.
(2) Strict Storage Requirements
Strict inspections should be carried out when the fuel pump IMV valves are put into storage, the surface cleaning work should be done well to remove water traces, oil stains, ash and other dirt, remove the rust and do anti-rust treatment in time. Packaged fuel pump IMV valves must be protected from damage.
(3) Keep The Warehouse Dry And Do Moisture-proof Work
The relative humidity is usually below 70% for the fuel pump IMV valves placed in the room, and the corrosion of the fuel pump IMV valves is significantly reduced.
Fuel pump IMV valves must be stored in the warehouse, and they are forbidden to store in the same warehouse with commodities with high water content.
(4) Reasonable Stacking
After the fuel pump IMV valve is exposed to rain, the corrosion rate will increase significantly. The purpose of sealing is to isolate the fuel pump IMV valve from rainwater and humid air, so the warehouse window should be checked in time to avoid rainwater entering the warehouse.
If the fuel pump IMV valve package is damaged, it should be repaired or replaced; when the package is damp, the packaging material should be dried; if the original anti-corrosion and oil applied at the factory is found to be damaged or dried up, it should be cleaned and re-applied oil in time.
“28362036 Fuel Pump IMV Valve Encyclopedia” is a protected work of www.imvvalve.com and is protected by international agreements and China copyright laws. This material may not be used, reproduced, or distributed in an unauthorized manner. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher, except in the case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law.
For permission requests or further information, please contact us via hison@shumatt.com.
